Core and SDC Status LED
The STATUS LED on the Access Control Core and Single Door Controller (SDC) indicate the following:
Solid White indicates the SDC is provisioned and functioning normally
Solid Green indicates the Core is provisioned and functioning normally
Blinking Red indicates there is a problem with the Internet connection
Solid Cyan appears when the SDC/Core is booting
Solid Yellow indicates that the SDC/Core is restoring software; appears when you turn on the SDC/Core for the first time
Blinking Yellow indicates that the SDC/Core is updating software; appears when the SDC/Core has been online for less than 24 hours
Solid Blue indicates that the SDC/Core has finished booting and is ready for provisioning
Solid Purple indicates that the SDC/Core is connected to the Open Admin app
Blinking Purple indicates the SDC/Core is ready to connect to the Open Admin app
Solid Red indicates the SDC/Core is in an error state–go to the Hardware Dashboard in the Control Center for more information
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article